Bobst Domino 145 Matic 1988

Accessories: Automatic bottom , All motorized transports , 4 corners min. 80 x 120 cm. (depends on kind of flaps) , Straight line boxes , Pneumatic carpet in delivery , No. 3 side joggers in delivery , No. 2 Mactron motorized guns glue system

Bobst MISTRAL 110 A2 CS 2005

Accessories: FEEDER : total lenght 1320 mm , 8 Infeed conveyors with 30 mm belts, with 4 built-in mechanical vibrators , 1 Thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 1 Additional thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 2 Side lays in two parts. With right gauge equipped with a digital position indicator. Asymmetrical and adjustable longitudinally. Maximum height of the stack of die cut: 350 mm , 1 Gear-motor. Controlled by a frequency converter for feeding the infeed belts and switching on or off , 1 Series of adjustable rear guides mounted on a longitudinally adjustable carriage with pneumatic closure , 1 Lower right transporter. With 25 mm belts and 1 obliquely adjustable upper transport for perfect alignment of the die cuts , 1 Left Pre breaker positioned at 90° , Total lenght 2.300 mm , Lower left conveyor with 43 mm belt. With digital position indicator

Bobst NOVACUT 106E 3.0 2019

Accessories: Pile tray wit handle allowing manul lateral correction of the pile during production , Pile lifting controlled by pressfoot , Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill , Real pile guides (OS and OOS) , Side blowers adjustable with Centerline marks , Suction unit , Safety system for lowering the pile tray , Feed table covered with an anti-static stainless steel plate , Feed table inlet equipped with lateral ramps , Feed table with support plates at entry of platen station , Feed table with 4 front lays, adjustable in pairs with front register control

Bobst PHARMA 36 1973

Bobst SP 102 BMA 1990

Accessories: Computer touch screen for forwarding band control; temperature control (RETROFIT WITH NEW PC FOILMASTER MODEL) , Non-stop on feeder , Pull lay operator side , N. 3 SHAFTS FOR ADJUSTING THE FEEDING OF THE BELTS, CONTROLLED BY ENGINES , Standard equipment for controlling no. 6 bands , Honeycomb chase and plate 2,3 mm and 3 mm , Band brake detection (16 bands) , Heating flat system with 12 zones, heated upper beams , NO. 1 LATERAL EVACUATION DEVICE FOR METAL BAND WITH ROTARY BRUSHES AT VARIABLE SPEED DEPENDING ON THE ADVANCEMENT OF THE BELTS , Automatic Non-stop with carpet in delivery , 7.500 speed/h

Bobst SP 104 E 1998

Accessories: No. 2 CUBE control system (One to the Stripping unit and one to the feeder unit) , Automatic Universal feeder with Non-stop facility , Standard Feeder with all its equipment , Pull lay operator side , Push lay opposite operator side , Non-stop on feeder with swords , Automatic lateral pile adjusting , E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise. , Cutting plate with micrometric adjustment for 1 mm thin plates , 1 die-cutting closed bottom frame with quick tightening , 1 die-cutting upper stripping frame with Quick Lock

Bobst SP 104 ER 1999

Accessories: Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic); + 1 additional CUBE interface , Automatic Universal feeder with non stop facility , Adjustable feed table with complement of infeed table furniture , C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES , C-8 MOTORIZED VERTICAL ADJUSTMENT OF THE SUCTION UNIT , Thin plate with micro metric adjustment , E-5 COMPENSATION PLATE 4 MM , E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC) , No. 1 fast female tightening , Upper pull-out frame quick lock for stripping , B-23 SHEET BRAKING DEVICE USING BERNOULLI SYSTEM AT STRIPPING SECTION

Bobst SP 126 BMA 1990

Accessories: Non-stop feeder , 2 x Foil Pulls , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Speed 5.000 s/h , Cutting power 500 TON , Pile height Feeder max 1400 mm Delivery max 1100 mm , Paper 80/90 g/m2 - Corrugate 4 mm , Size min 350x500 mm / max 920x1260 mm

Bobst SP 126 BMA 1992

Accessories: Non-stop feeder , 2 x Foil Pulls , Dwell System for stopping the machine in pressure , Table for band preparation , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Elevated 350 mm , Temperature from 50º to 160º , All books, Manuals and Tools

Bobst SP 126 BMA 1992

Accessories: Retrofit computer and software SP 126 BMA FoilMaster 2024 , Computer touch screen for forwarding band control; temperature control , Non-stop feeder , Pull lay operator side , 16 heating zones , Hot-Gold Foil System , No. 3 shafts for pushing forward the bands , No. 1 honeycomb , Non-stop delivery with belt convey , Speed 5.000 s/h , Pile height Feeder max 1400 mm Delivery max 1100 mm

Bobst SP 130 ER 1985

Accessories: Pressure gauge and limiter , Feed table with front register control , Feed table with pull lay operator side , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Feed table with transport equipment for paper and solid board from 90 to 1000 g / m2 , Feed table with pull lay operator opposite side , Die-Cutting platin with 1 cutting plate 5 mm , Micrometric adjusting system , 1 more die chase closed bottom for the platin , Diecutting platen with a die-cutting chase (fixed bottom plate)

Bobst SP 130 ER 1987

Accessories: Centerline , Pull lay operator side , All books, Manuals and Tools , Elevated 350 mm

Bobst SP 130 ER 1989

Accessories: Centerline , Pull lay operator side , Motorized suction head unit , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Micrometric centering of the cutting sheet , All books, Manuals and Tools , Elevated 350 mm

Bobst SP 142 E 1998

Accessories: Centerline , Non-stop on feeder with swords , Motorized head feeder , Automatic shift for the platform , Pull lay operator side , Universal feeder , D-3 PUSH GUIDE (OOS opposite operator side) , 1 central stripping quick lock , 1 die chase closed bottom , Upper pull-out frame for stripping with 3-point locking complete with all its standard equipment , 1 lower stripping frame with all its standard equipment with 3 points

Bobst SP 142 E 1981

Accessories: Centerline , Motorized head feeder , Automatic Universal feeder with big tanks , Automatic shift for the platform , Non-stop on feeder with swords , Push lay operator side , Receiving pull lay of the push lay operator side , Guide belt device on feeder table , D-3 PUSH GUIDE (OOS opposite operator side) , 1 central stripping quick lock , Upper pull-out frame quick lock for stripping

Bobst SP 142 E 1986

Accessories: Centre Line , Automatic Universal feeder with big tanks , Automatic shift for the platform , Motorized head feeder , Non-stop on feeder with swords , Push lay opposite operator side , Pull lay operator side , Receiving pull lay of the push lay operator side , 1 central stripping quick lock , 1 GRID die-cutting upper stripping frame with all its standard equipment , Non-stop delivery with belt convey

Bobst SP 142 ER 1988

Accessories: Pull lay operator side , Universal Feeder with big tanks for corrugate , Motorized suction head unit , Pile feeder with automatic lateral moving , Pushing lay for corrugate , Non-stop on feeder with swords , Micrometric centering of the cutting sheet , 3 points on lock system on ejection unit , Quick lock male frame of the splicer of pose , 3 points on lock system on blanking unit , Universal lower tool for blanket

Bobst SP 1420 E 1974

Accessories: Square type feeder head , Push lay opposite operator side , Pull lay operator side with double bearing kit for microwave , Non-stop delivery with belt convey , Elevated 350 mm

Bobst SP 1600-E 1979

Accessories: Pull lay , Thickness max. 4 mm , Machine elevated , Speed : 5000 sh/h

Bobst SP 76 BM 1999

Bobst SP 76 BM Foilmaster 2002

Accessories: CUBE control system , Computer forwarding control and calculation system band, temperature control , Pull lay operator side , Pull lay opposite operator side , Ionization system , Antistatic bars , 1 honeycomb frame mod. Europe 17 mm. , Non-stop delivery with carpet , Pirouetting jogger , Standard equipment for controlling no. 6 bands , All books, Manuals and Tools

Bobst SP 76 E 2000

Accessories: CUBE control system , Pull lay operator side , Non-stop on feeder , Die-cutting plate 4 mm , Cutting plate with micrometric adjustment for 1 mm thin plates , Stripping Pre make ready table , 1 die-cutting upper stripping frame with Quick Lock , Upper and lower stripping equipment (pins, bars, tools, etc.) , Non-stop delivery with belt convey , 7.000 speed/h (depending on cardboard and type of iob feature) , Normal die cutting plate 4 mm

Bobst SP EVOLINE 102-E 2002

Accessories: CUBE control system , Pull lay operator side , Standard Feeder with all its equipment , Non-stop device on feeder , 1 die-cutting upper stripping frame , Diecutting chase (fixed bottom plate) , Micrometric system with compensation plate 3 mm and 1 mm small sheet metal , Centerline system for quick job changeover , 1 lower stripping frame with all its standard equipment , Quick fastening female , Cutting force 250 TON

Bobst SPERIA 106 E 2005

Accessories: CUBE control system , Centerline system for quick job changeover , Pull lay operator side , C-4 NON-STOP FEEDER MANUAL DEVICE , C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL , Grippers re-opening device (Platin) , Cutting plate with micrometric adjustment for 1 mm thin plates , Equipment centering and locking on platin , Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925) , 1 Die-cutting chase , E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL

Bobst SPERIA 106 E 2007

Accessories: CUBE control system , Pull lay operator side , Push lay opposite operator side , C-4 NON-STOP FEEDER MANUAL DEVICE , C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL , D-1 PULL GUIDE (OOS) , D-3 PUSH GUIDE (OOS opposite operator side) , 1 Die-cutting chase , Cutting plate with micrometric adjustment for 1 mm thin plates , Grippers re-opening device (Platin) , Equipment centering and locking on platin