BLUMER ATLAS 110 PB18.1 1997

Accessories: D-18 Die-Cutting punching device , SE-18.2 Infeed and cross cutter with programm , ST-18.2 Strip stack infeed unit , PB-18.1 Horizontal and vertical banding unit with delivery

Bobst Domino 145 Matic 1988

Accessories: Automatic bottom , All motorized transports , 4 corners min. 80 x 120 cm. (depends on kind of flaps) , Straight line boxes , Pneumatic carpet in delivery , No. 3 side joggers in delivery , No. 2 Mactron motorized guns glue system

Bobst MISTRAL 110 A2 CS 2005

Accessories: FEEDER : total lenght 1320 mm , 8 Infeed conveyors with 30 mm belts, with 4 built-in mechanical vibrators , 1 Thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 1 Additional thickness gauge. With lateral and longitudinal adjustment and upper introduction rollers , 2 Side lays in two parts. With right gauge equipped with a digital position indicator. Asymmetrical and adjustable longitudinally. Maximum height of the stack of die cut: 350 mm , 1 Gear-motor. Controlled by a frequency converter for feeding the infeed belts and switching on or off , 1 Series of adjustable rear guides mounted on a longitudinally adjustable carriage with pneumatic closure , 1 Lower right transporter. With 25 mm belts and 1 obliquely adjustable upper transport for perfect alignment of the die cuts , 1 Left Pre breaker positioned at 90° , Total lenght 2.300 mm , Lower left conveyor with 43 mm belt. With digital position indicator

Bobst NOVACUT 106E 3.0 2019

Accessories: Pile tray wit handle allowing manul lateral correction of the pile during production , Pile lifting controlled by pressfoot , Synchronization device timing the sheet arrival against the front lays when the machine is at a standstill , Real pile guides (OS and OOS) , Side blowers adjustable with Centerline marks , Suction unit , Safety system for lowering the pile tray , Feed table covered with an anti-static stainless steel plate , Feed table inlet equipped with lateral ramps , Feed table with support plates at entry of platen station , Feed table with 4 front lays, adjustable in pairs with front register control

Bobst PHARMA 36 1973

Bobst SP 102 BMA 1990

Accessories: Computer touch screen for forwarding band control; temperature control (RETROFIT WITH NEW PC FOILMASTER MODEL) , Non-stop on feeder , Pull lay operator side , N. 3 SHAFTS FOR ADJUSTING THE FEEDING OF THE BELTS, CONTROLLED BY ENGINES , Standard equipment for controlling no. 6 bands , Honeycomb chase and plate 2,3 mm and 3 mm , Band brake detection (16 bands) , Heating flat system with 12 zones, heated upper beams , NO. 1 LATERAL EVACUATION DEVICE FOR METAL BAND WITH ROTARY BRUSHES AT VARIABLE SPEED DEPENDING ON THE ADVANCEMENT OF THE BELTS , Automatic Non-stop with carpet in delivery , 7.500 speed/h

Bobst SP 104 E 1998

Accessories: No. 2 CUBE control system (One to the Stripping unit and one to the feeder unit) , Automatic Universal feeder with Non-stop facility , Standard Feeder with all its equipment , Pull lay operator side , Push lay opposite operator side , Non-stop on feeder with swords , Automatic lateral pile adjusting , E 55 ADJUSTABLE SUPPORTING PLATE CENTERINGS : micromeric screws allow fine adjustment of counters mounted on the cutting plate with respect to the die (+/- 0,9 mm lengthwise and crosswise. , Cutting plate with micrometric adjustment for 1 mm thin plates , 1 die-cutting closed bottom frame with quick tightening , 1 die-cutting upper stripping frame with Quick Lock

Bobst SP 104 ER 1999

Accessories: Bobst-Electronic machine operationg system C.U.B.E. : (Control Unit Bobst Electronic); + 1 additional CUBE interface , Automatic Universal feeder with non stop facility , Adjustable feed table with complement of infeed table furniture , C-5 CONTROLLABLE SHEET ARRIVAL FOR PERFECT SYNCHRONIZATION OF SHEET ARRIVAL AND REDUCTION OF MACHINE STOPPAGES , C-8 MOTORIZED VERTICAL ADJUSTMENT OF THE SUCTION UNIT , Thin plate with micro metric adjustment , E-5 COMPENSATION PLATE 4 MM , E-55 ADJUSTABLE SUPPORTING PLATE CENTERINGS (MICROMETRIC) , No. 1 fast female tightening , Upper pull-out frame quick lock for stripping , B-23 SHEET BRAKING DEVICE USING BERNOULLI SYSTEM AT STRIPPING SECTION

Bobst SP 126 BMA 1990

Accessories: Non-stop feeder , 2 x Foil Pulls , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Speed 5.000 s/h , Cutting power 500 TON , Pile height Feeder max 1400 mm Delivery max 1100 mm , Paper 80/90 g/m2 - Corrugate 4 mm , Size min 350x500 mm / max 920x1260 mm

Bobst SP 126 BMA 1992

Accessories: Non-stop feeder , 2 x Foil Pulls , Dwell System for stopping the machine in pressure , Table for band preparation , 16 heating zones , Hot-Gold Foil System , No. 1 honeycomb , Non-stop delivery , Elevated 350 mm , Temperature from 50º to 160º , All books, Manuals and Tools

Bobst SP 126 BMA 1992

Accessories: Retrofit computer and software SP 126 BMA FoilMaster 2024 , Computer touch screen for forwarding band control; temperature control , Non-stop feeder , Pull lay operator side , 16 heating zones , Hot-Gold Foil System , No. 3 shafts for pushing forward the bands , No. 1 honeycomb , Non-stop delivery with belt convey , Speed 5.000 s/h , Pile height Feeder max 1400 mm Delivery max 1100 mm

Bobst SP 130 ER 1985

Accessories: Pressure gauge and limiter , Feed table with front register control , Feed table with pull lay operator side , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Feed table with transport equipment for paper and solid board from 90 to 1000 g / m2 , Feed table with pull lay operator opposite side , Die-Cutting platin with 1 cutting plate 5 mm , Micrometric adjusting system , 1 more die chase closed bottom for the platin , Diecutting platen with a die-cutting chase (fixed bottom plate)

Bobst SP 130 ER 1987

Accessories: Centerline , Pull lay operator side , All books, Manuals and Tools , Elevated 350 mm

Bobst SP 130 ER 1989

Accessories: Centerline , Pull lay operator side , Motorized suction head unit , Pile feeder with automatic lateral moving , Non-stop on feeder with swords , Micrometric centering of the cutting sheet , All books, Manuals and Tools , Elevated 350 mm

Bobst SP 142 E 1998

Accessories: Centerline , Non-stop on feeder with swords , Motorized head feeder , Automatic shift for the platform , Pull lay operator side , Push lay opposite operator side , Universal feeder , 1 central stripping quick lock , 1 die chase closed bottom , Upper pull-out frame for stripping with 3-point locking complete with all its standard equipment , 1 lower stripping frame with all its standard equipment with 3 points

Bobst SP 142 E 1981

Accessories: Centerline , Motorized head feeder , Automatic Universal feeder with big tanks , Automatic shift for the platform , Non-stop on feeder with swords , Push lay operator side , Receiving pull lay of the push lay operator side , Guide belt device on feeder table , D-3 PUSH GUIDE (OOS opposite operator side) , 1 central stripping quick lock , Upper pull-out frame quick lock for stripping

Bobst SP 142 E 1986

Accessories: Centre Line , Automatic Universal feeder with big tanks , Automatic shift for the platform , Motorized head feeder , Non-stop on feeder with swords , Push lay opposite operator side , Pull lay operator side , Receiving pull lay of the push lay operator side , 1 central stripping quick lock , 1 GRID die-cutting upper stripping frame with all its standard equipment , Non-stop delivery with belt convey

Bobst SP 142 ER 1988

Accessories: Pull lay operator side , Universal Feeder with big tanks for corrugate , Motorized suction head unit , Pile feeder with automatic lateral moving , Pushing lay for corrugate , Non-stop on feeder with swords , Micrometric centering of the cutting sheet , 3 points on lock system on ejection unit , Quick lock male frame of the splicer of pose , 3 points on lock system on blanking unit , Universal lower tool for blanket

Bobst SP 1420 E 1974

Accessories: Square type feeder head , Push lay opposite operator side , Pull lay operator side with double bearing kit for microwave , Non-stop delivery with belt convey , Elevated 350 mm

Bobst SP 1600-E 1979

Accessories: Pull lay , Thickness max. 4 mm , Machine elevated , Speed : 5000 sh/h

Bobst SP 76 BM 1999

Bobst SP 76 BM Foilmaster 2002

Accessories: CUBE control system , Computer forwarding control and calculation system band, temperature control , Pull lay operator side , Pull lay opposite operator side , Ionization system , Antistatic bars , 1 honeycomb frame mod. Europe 17 mm. , Non-stop delivery with carpet , Pirouetting jogger , Standard equipment for controlling no. 6 bands , All books, Manuals and Tools

Bobst SP 76 E 2000

Accessories: CUBE control system , Pull lay operator side , Non-stop on feeder , Die-cutting plate 4 mm , Cutting plate with micrometric adjustment for 1 mm thin plates , Stripping Pre make ready table , 1 die-cutting upper stripping frame with Quick Lock , Upper and lower stripping equipment (pins, bars, tools, etc.) , Non-stop delivery with belt convey , 7.000 speed/h (depending on cardboard and type of iob feature) , Normal die cutting plate 4 mm

Bobst SP EVOLINE 102-E 2002

Accessories: CUBE control system , Pull lay operator side , Standard Feeder with all its equipment , Non-stop device on feeder , 1 die-cutting upper stripping frame , Diecutting chase (fixed bottom plate) , Micrometric system with compensation plate 3 mm and 1 mm small sheet metal , Centerline system for quick job changeover , 1 lower stripping frame with all its standard equipment , Quick fastening female , Cutting force 250 TON

Bobst SPERIA 106 E 2005

Accessories: CUBE control system , Centerline system for quick job changeover , Pull lay operator side , C-4 NON-STOP FEEDER MANUAL DEVICE , C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL , Grippers re-opening device (Platin) , Cutting plate with micrometric adjustment for 1 mm thin plates , Equipment centering and locking on platin , Synthetic material supporting plate on platen (Thickness 23.5 mm (0,925) , 1 Die-cutting chase , E-5 COMPENSATING PLATE. THICKNESS 4 MM. IN GROUND STEEL

Bobst SPERIA 106 E 2007

Accessories: CUBE control system , Pull lay operator side , Push lay opposite operator side , C-4 NON-STOP FEEDER MANUAL DEVICE , C-5 SYNCHRONIZATION DEVICE TIMING THE SHEET ARRIVAL AGAINST THE FRONT LAYS WHEN THE MACHINE IS AT A STANDSTILL , D-1 PULL GUIDE (OOS) , D-3 PUSH GUIDE (OOS opposite operator side) , 1 Die-cutting chase , Cutting plate with micrometric adjustment for 1 mm thin plates , Grippers re-opening device (Platin) , Equipment centering and locking on platin

CVS Meccanica LINEAR RP 160 Registro Preciso 2016

Accessories: Upper feeder : Paper 180 - 20 gr. up to 500 gr. stretched cardboard , Lower feeder : Microwaves; Low Waves; MicroTriple UnCover; Microwaves; Low Waves; MicroTriple Cover ; Gray cardboard 1 - 2 - 3 mm , Precise register on gripper and pull lay , Pressing belt in the delivery after the glue unit , 1.000 speed/h , Mod. Linear RP Precise Register , Vinyl glue device , Lenght 12 mt about

Diesse VIBRI 1997

Guandong Hongming HM-ZD6418D High Speed Automatic NEW

Accessories: 1. Suitable for all kinds of automatic production lines of cardboard world cover , 2. Set the function parameters of the whole computer , 3. Fault diagnosis function , 4. Automatic feeding function of tissue paper and ash feeding board , 5.24 hours control glue preheating function , 6. 300 product formulations are built into the molding machine , 7. Separate human-machine interface control for four-corner heating , 8. The whole machine adopts yaskawa servo control system , 9. Image positioning system and robot grasping and positioning (error ±0.05mm) , 10. Automatic carton lifting and drawing device , 11. Automatic glue viscosity control system (optional)

Heiber+Schröder WP 11 D

Accessories: Automatic reel change with splicer

Heidelberg TH82 6/4/2 Rotary 2005

Accessories: Rotary RFH feeder , 1° station with 6 pockets automatized Kat.II with High Performance Kit , 2° station 4 pockets automatized +High Performance , 3° station with 2 pockets automatized 66 cm. Kat.II with High Performance Kit , Orizontal delivery SBP.D

Jagenberg 105-2 1993

Accessories: Speed: 450 M/Min,

Jagenberg 74-1 1998

Accessories: Linear Box Machine

Jagenberg JAPACK 40-3 2001

Mbo T52

Muller Martini 235

Muller Martini PRIMA AMRYS 1998

Accessories: No. 4 Horizontal signature feeder mod. 370 , Cover feeder 1529 , Stitching unit mod. 390 , No. 2 Stitching heads HK75 , Trimmer mod. 0360 , Stacker Cucciolo

Polar 115 ED 1997

Accessories: Polar PC , Digital colour display , Light beam Safety Guards , Chrome central table , Right side air table in high pressure laminate (formica) , Left lateral triangle air table in high-pressure laminate (formica) , Left lateral triangle air table chromed , Polar RA-4 with air removal Jogger (Year 2006) , Polar Transomat TR130ER-4 Down loader (Year 2005) , LW1000-4 Pile Lift

Polar 137 ED AUTOTRIM 1996

Accessories: POLAR Electronic Programs , Flat color monitor , AT = AutoTrim automatic cutting waste removal , Central air table chromed , Side air tables chromed , Triangular chromed and blowing small side tables , No. 2 Knives VIDIA

Stahl TD78 6/4/2-PD-T 2003

Accessories: Pallet feeder , 1° station 78 cm with 6 pocket , 2° station 66 cm with 4 pocket , 3° station 56 cm with 2 pocket , All buckle plates are motorized with automatic positioning , Orizontal delivery SBP.D-86+MKE , Window folder , All books, electrical scheme, manual instruction books, spare parts books and standard tools , No. 2 guns glue system HHS C-1100

Stahl TFU78 1990

Accessories: Rotary Feeder , Knife for 32° , Orizontal delivery SBP 46

Stahl TI 52 4-KBi-Ti-52Ri52 2000

Accessories: Center control-panel DCT-500 , Tremat head , Flat pile feeder , 1. fold-station 52 cm, 4 buckles , Rear supported knife-shafts with accessories , 2. foldstation 52 cm, 4 buckles , Extra transfer-device to 2. foldstation , MBO-SAP-46L, mobile vertical pile-delivery + press-station, year 2000 , Anti-noise-hoods , Air-support: from center-support-system , ACC-2.4 for glue-system control

Vega 80 S 1997

Accessories: Automatic bottom , Disc gluer , Ejector , Motorized Pneumatic Conveyor , Linear , Position Indicators

Vega JUNIOR 1998

Accessories: VegaPack MD34/3 , Tray Gluer

Vega Pegaso 110 2003

Accessories: Introductor system on feeder , Speed variator on feeder , Air blower on feeder , Automatic bottom module , Module with hooks to make the automatic bottom , No. 8 ERO guns glue system , Speed variator of distancing on right and left side for boxes in delivery , Speed variator of the belts in delivery , Jogger on right and left side on delivery , Jogger on delivery , Air blower on delivery

Vega SIRIO 82 2002

Accessories: Lock Bottom device , Introduction blowing device for PVC boxes , 4 corner device

Wohlenberg 132 1981

Accessories: Photocells , Computer , Chromed blower tables

YAWA MW 1050 G 2013

Accessories: Additional blowers for papaer , Photocells for sheet travel control for synthetic material , Stripping , Upper pull-out frame quick lock , Nr 2 Upper pull-out quick lock frames , Nr 4 lower stripping frame for needles , NON-STOP conveyor in the delivery , 60 / 5.000 Die cutting machine with heated plate for synthetic materials