Used Post-Press machines for Sale
BOBST HEIDELBERG POLAR STAHL
Enlarge
Bobst SP 142 E
The machine was selected and carefully inspected by our engineers prior to purchase.
MACHINE SPECIFICATION
| Manufacturer | Bobst |
|---|---|
| Model | SP 142 E |
| Type | Die Cutting/fustellatrici |
TECHNICAL DATA
| Max sheet size | 1020 x 1420 |
|---|
Accessories
- Machine
- Step with safety barriers
- Centerline system for quick job changeover
- Electronic device for the sheet passage control
- Gripper bars
- Bobst-Electronic for the machine control
- Main motor
- Feeder
- Manual non-stop device
- Stack holder platform with automatic system for lateral correction via feelers (adjustable with Centerline marks) or manual system via a selector, during production
- Automatic movement of the stack holder platform adjustable in the direction of travel
- Synchronizer to regulate the arrival of sheets to the registers
- Pile height control at the front edge thanks to a photoelectric cell
- Lateral blowers adjustable with Centerline references
- Suction unit
- Safety system for lowering the pile try
- Introduction table
- Covered with an anti-static stainless steel plate
- Adjustable sheet synchronizer while running, allows to adapt the feeder cycle to that of the platen
- 4 Front lays, adjustable in pairs with front register control, with sheet presence
- Pull-lay operator side (OS) adjustable according to Centerline, with sheet control
- Pull-lay opposite operator side (OOS) adjustable according to Centerline, with sheet control
- Double sheet detector
- Sheet-hold down device (Introduction sheets guide in gripper)
- D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts)
- Side-guided transport belts
- Upper frame with pneumatic lifting device
- Platin
- Grippers re-opening device
- Die-cutting device without band of gripper grip
- Equipment centering and locking
- Locking of the chase against the upper beam
- Measurement of the die-cutting force using an electronic probe
- Resocell: synthetic material supporting plate
- SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON PLATIN
- 1 Upper frame: with fixed bottom (E-1). Bottom sheet, 2 mm thick and synthetic protection plate, 1 mm thick
- 1 Cutting plate (E-4)
- Stripping Station
- 3 drawer frames system
- SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON STRIPPING STATION
- Quick locking device of the central stripping board on Waste Stripping Station
- 1 Upper pull-out frame (F-2)
- 1 Upper stripping equipment (F-21) required to create a waste stripping tool, including crossbars, clamps, stripper holders and stripping pins of 3, 5 and 10 mm of diameter
- 1 Fastening equipment for stripping die (F-22) Including crossbars and clamps
- 1 lower pull-out frame (F-8)
- F-81 lower stripping equipment for waste stripping (F-81) Including crossbars, pins and supports
- 1 "GRID" UPPER PULL-OUT FRAME WITH ALL ITS STANDARD TOOLS
- Delivery
- Pile tray
- Adjustable rear and side joggers with Centerline marks
- Sheet shredder special device
- Guillotine device for front trim with lateral evacuation belt
- G-5 AUTOMATIC NON-STOP ON DELIVERY
- SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON DELIVERY
- Conformity to standards and security
- The Autoplaten Presses SP 142-E is in conformity with the European Directives for the Safety and Health requirements related to its design and construction, sa well American standards UL 508 and NFPA related to industrial equipment
- Emergency Stops
- Operator safety devices
- Gripper Bar Chain Slip Clutch
- Gripper bar chain locking device
- Handling of the diecutting equipment
- Photoelectric cell safety barriers located at the feeder and at the delivery
Machine overview
| Year | 1998 |
|---|---|
| Serial Number | 057406402 |
| N.of working hours | 25571 |
“EXTRA” Accessories Overview
- D-7 REINFORCED SHEET TRANSPORT EQUIPMENT for rigid and corrugate cardboard included: Introducers and upper belts - Upper transport elements (wide belts)
- Upper frame with pneumatic lifting device
- 1 "GRID" UPPER PULL-OUT FRAME WITH ALL ITS STANDARD TOOLS
- G-5 AUTOMATIC NON-STOP ON DELIVERY
- SHEET BRAKES DEVICE BY "BERNOULLI" SYSTEM ON DELIVERY
Reference Overview
| Reference | 20035625 |
|---|---|
| Visible | In production |
| Availability | Immediately |
MACHINE VIDEOS
Contacts
Camporese Macchine Grafiche S.p.A
Via Del Santo, 243 - 35010 - Limena (Padova) Italy
+39 049 767166
+39 049 767629
info@camporese.it
Partita Iva IT03429400280
Euro 2.000.000,00 issued and fully paid-up share capital
Via Del Santo, 243 - 35010 - Limena (Padova) Italy
+39 049 767166
+39 049 767629
info@camporese.it
Partita Iva IT03429400280
Euro 2.000.000,00 issued and fully paid-up share capital
Euro 5.495.000,00 net asset
Newsletter
Stay tuned to Camporese offers!
